TRIGGER SENSITIVITY ADJUSTMENT
If you don´t want to change the default sensitivity trap adjustment, go to the paragraph
At first set the trap without bait. Then use the suitable tool and push the metal pedal to check the trap sensitivity. Never put your fingers into the set trap, especially don´t touch the metal pedal. The required trap sensitivity is very easily adjustable by bending rear bar of the trap. Very fine bending downward increases the sensitivity and vice versa. (see attached image) Choose appropriate sensitivity of the trap. Too high trap sensitivity can cause unwanted triggering when handling trap. At too low sensitivity, it may happen that mouse eats bait and the trap doesn´t trigger. Repeat the whole process until the trap sensitivity is according to your needs and then continue in
1. Place a bait (such as peanut butter, chocolate, hazelnut spread) on the metal pedal of disabled trap using toothpick, Q-tip or other tool to mask human scent.
2. Set trap by pressing the rear set bar. Make sure you don´t put fingers in the bait area of activated trap. Trap spring force may cause injuries!
3. Carefully place the trap to areas of high rodent aktivity. The end of the trap with bait should be placed closest to the wall.
4. After the mouse is caught, dispose the dead rodent. Open the trap to drop the trapped mouse into the trash. No need to touch the rodent. We recommend using disposable gloves.